About

The project NailersHub appeared in 2001, in the beautiful city of Charlotte (North Carolina). The founder Raymond Melton had an Engineer’s degree from Wilmington University and practical working experience in a local repair store.

Recent Comments

    Archive

    Calendar

    November 2022
    M T W T F S S
     123456
    78910111213
    14151617181920
    21222324252627
    282930  

    Unicatch USC71/16L (US2238AL) Upholstery Stapler Review

    Do you have a Unicatch USC71/16L Upholstery Stapler? If not, then you may be wondering what all the fuss is about. This device has been gaining in popularity over the past few years, and for good reason! It is a high-quality stapler that is perfect for up to 16 gauge wire. This guide provides you with a review of the Unicatch USC71/16L Upholstery Stapler, as well as some useful tips on how to operate it effectively.

    Upholstery Stapler Unicatch USC71/16L

    Unicatch USC71/16L (US2238AL) UpholsteryLook no further than the Unicatch USC71/16L for all your upholstery needs. This versatile and easy-to-use tool will help you complete any DIY project with ease thanks to its elongated nose that allows reaching tight corners or difficult places without worrying about bumping into things while working on uneven surfaces!

    Plus, its air-powered design makes it a breeze to use. The USC71/16L is made of durable metal and plastic and features an ergonomic design that makes it comfortable to use. Moreover, its quick-release mechanism makes reloading a snap.

    And with a bottom loading magazine, you can keep working without interruption. The USC71/16L is also designed specifically for crown staples, so you can be sure it will handle any task you throw its way. Order your Unicatch USC71/16L today, and get the job done right!

    Pros
    • all-around tool for your DIY projects;
    • model with an elongated nose;
    • ‎an air-powered device;
    • made of metal and plastic;
    • allows to process hard-to-reach corners and places;
    • ergonomic design;
    • has a quick release mechanism;
    • uses 22 gauge;
    • with a bottom loading magazine;
    • designed especially for crown staples;
    • allows for faster reloading;
    • keeps debris out;
    • non-slip handle;
    • can be used with the stainless-steel staples;
    • can work on the thick layer areas;
    • can hold 178 nails at once.

    Cons
    • doesn’t work with pressure under 65 psi;
    • can skip if not oiled.


    Buyer’s guide

    Who Should Buy An Upholstery Stapler?

    An upholstery stapler is a tool that is specifically designed for attaching fabric to wood. If you are working on a project that involves upholstering furniture, then an upholstery stapler will make your life much easier.

    Who Should Buy An Upholstery Stapler?

    There are a few different types of upholstery staplers on the market, but the Unicatch USC71/16L is one of the most popular options. This device allows you to quickly and easily attach the fabric to wood, and it comes with a few different tips that you can use to get the perfect finish.

    Be sure to consider these operating instructions:

    The first thing that you need to do is determine what size staples you will need for your project. The Unicatch USC71/16L uses T50 staples, so be sure to purchase the right size before you get started.

    Next, you need to load the staples into the device. To do this, simply insert the strip of staples into the loading slot and then push down on the lever until it clicks into place.

    Now that your device is loaded, you can start stapling the fabric to the wood. Begin by pulling back on the handle and then squeezing the trigger to fire a staple into the wood. Be sure to keep your fingers clear of the firing mechanism, as it can be dangerous if you are not careful.

    Once you have attached all of the fabric, you can release the handle and remove any excess staples from the wood. If necessary, you can also use a hammer to drive the staples further into the wood.

    Upholstery staplers can be a bit tricky to use, but with these tips, you should be able to get the perfect finish on your next project. Be sure to take your time and practice using the device before you start your project, as this will help you avoid any accidents.

    What Makes a Good Upholstery Stapler?

    There are a few features that make a good upholstery stapler. First, it should have an adjustable depth of drive. This feature lets you control how far the staples go into the fabric, which is important for both safety and aesthetics.

    Second, it should have a wide range of staple sizes. This allows you to choose the right size for the job at hand, whether you’re working with light-duty fabrics or heavy-duty leather. Finally, it should be comfortable to use. Upholstery projects can be time-consuming, so you want a stapler that won’t cause hand fatigue.

    What Makes a Good Upholstery Stapler?

    The Unicatch USC71/16L (US2238AL) Upholstery Stapler has all of these features and more. It’s a heavy-duty stapler that can handle a variety of fabrics, from light to heavyweight. The depth of drive is adjustable, so you can control how far the staples go into the fabric. And the wide range of staple sizes means you can find the perfect size for your project.

    Main features of the device in detail

    Durability and Performance

    This Unicatch upholstery stapler is made with heavy-duty aluminum construction. This gives the stapler durability and strength to drive staples into even the toughest surfaces. The anodized finish also protects against corrosion.

    As for performance, this stapler can shoot both T50 and AT series staples from 6,35 mm to 12,5 mm in length.
    It has a magazine capacity of 155 staples and can shoot up to 70 shots per minute.

    Jams and Misfires

    One issue you might run into with this stapler is jammed. To clear a jam, first, make sure the magazine is fully loaded. Jams and MisfiresIf it’s not, that could be the problem. If the magazine is full and you’re still having issues, remove the jammed staples from the magazine one at a time. You can also try slightly bending the staples to see if that helps them feed through better. As for misfires, check to see if anything is blocking the firing mechanism and then try again.

    Operating function

    This stapler is easy to operate. Just squeeze the trigger and push the stapler forward until it’s down. You’ll know it’s in the right position when you hear a “click.” Then, release the pressure on the trigger and pull back on the stapler to cock it again. Repeat this process until you’ve reached your desired staple density.

    How to choose the right upholstery staples

    Types of metal staples used in upholstery

    When it comes to choosing the right staples for your upholstery project, there are a few things you need to take into account. The first is the type of metal used in the staple. There are two common types of metal used in upholstery staples: steel and aluminum.

    Steel staples are the more durable option and are less likely to bend or break when being inserted into hardwood or other dense materials.
    Aluminum staples, on the other hand, are lighter and easier to insert but aren’t as strong as their steel counterparts [1].

    Width and length of staples

    The next thing to consider is the width and length of the staples. Upholstery projects typically require staples that are wider and longer than those used for general home improvement tasks. The reason for this is that upholstery fabric is usually thicker and tougher than regular household fabrics.

    As a result, you’ll need stronger staples to penetrate the material and hold it in place.

    Width and length of staples

    There are a few different sizes of upholstery staples available, but the most common are 18 gauge and 20 gauge. 18 gauge staples are wider and longer than 20 gauge staples, making them better suited for heavier fabrics [2].


    FAQ

    What is an upholstery stapler?

    An upholstery stapler is a handheld device that uses pressure and a small, sharpened metal rod to push staples into fabric or other materials. The staples are then used to hold the fabric in place.

    Are upholstery staples different?

    Yes, they are slightly different. Upholstery staples are slightly longer and have a more blunt end than regular staples. This is because they are meant to go through thicker materials without tearing them.

    What type of staple gun is used for upholstery?

    There are two types of staple guns that can be used for upholstery: manual and electric. Manual staple guns require you to squeeze the handle to push the staples through the fabric. Electric staple guns have a trigger that, when pulled, will cause the staples to be pushed through the fabric.

    Do you need a pneumatic staple gun for upholstery?

    No, you do not need a pneumatic staple gun for upholstery. However, if you have one, it will make the job easier.

    Useful Video: What Are The Best Staple Guns for Upholstery To Buy?

    Conclusion

    The Unicatch model of the Upholstery Stapler is a good quality product that is very versatile and can be used for a variety of applications. The price is reasonable, and it comes with a one-year warranty. With proper care and maintenance, this stapler should provide years of reliable service.

    Operating this stapler effectively requires following the manufacturer’s instructions carefully and using the appropriate staples for the job at hand. When troubleshooting problems, checking the most common issues first – such as whether there is enough air pressure or if the staples are jammed – can save time and frustration.


    References:

    1. https://www.stapleheadquarters.com/upholstery-staples
    2. https://www.nailgundepot.com/blog/how-to-choose-the-right-upholstery-stapler-blog.html